How Many Cups in a Pint? (With Conversion Chart)

Here is an easy-to-use guide to everything related to the question “How many cups in a pint?”. 

This post explains exactly how many cups are in a pint. Find out the difference between cups and pint measurements and get great tips on measuring!

Check out How Many Cups in a Liter and Cups in a Pound of Flour too.

How many cups in a pint.

Want to Save this Recipe?

Enter your email below & we’ll send it straight to your inbox. Plus you’ll get great new recipes from us every week!

Save Recipe

What is a Cup?

In baking, a cup is a standard unit of measurement used to quantify dry and liquid ingredients accurately. 

Measuring cups come in various sizes and are designed to provide consistent measurements. Precise measuring is one of the best ways to get great baking and cooking results. 

Check out Cups to Gallons and What is Half of 3/4 Cups too!

Types of Measuring Cups:

  1. Dry Measuring Cups: These cups measure dry ingredients like flour, sugar, and cocoa powder. They usually come in sets, ranging from 1/4 cup to 1 cup. They have a flat top surface for leveling off ingredients.
  2. Liquid Measuring Cups: Liquid measuring cups are usually glass or clear plastic and have a spout for pouring. They come in various sizes, usually 1 to 4 cups, and have marked lines to indicate volume in milliliters (ml) and fluid ounces (fl oz). 

What is a Pint?

A pint is a unit of measurement used to determine the volume of a container, typically for liquids or wet ingredients. 

The term “pint” originates from the French word “pinte.”

In the United States, a pint is commonly used to measure liquids equal to 473ml. While there is a less common dry pint, it is primarily the liquid pint used in baking recipes. 

The imperial pint is used in the UK, Ireland, and several other commonwealth countries. It measures liquids at 568ml.

Note that for this article, we will be referring to the US pint.

US Cup Vs UK Cup

In baking and cooking, the term “cup” is used as a unit of measurement for both dry and liquid ingredients. 

There are slight differences between the US cup and the UK cup. Here is what to know about each:

US Cup:

  • The US cup = standard measurement used in the United States.
  • One US cup is equal to about 236.6 milliliters (ml) of liquid or about 240 grams of most dry ingredients.

UK Cup:

  • The UK cup is used in the UK and other countries that follow the imperial system of measurements.
  • One UK cup is equal to about 284.1 milliliters (ml) of liquid or about 227 grams of most dry ingredients.

Conversion Between US and UK Cups:

To convert between US and UK cups, you can use the following general guidelines:

  • 1 US cup ≈ 0.833 UK cup (liquid measurement)
  • 1 UK cup ≈ 1.2 US cups (liquid measurement)
  • 1 US cup ≈ 1.04 UK cups (dry measurement)
  • 1 UK cup ≈ 0.96 US cups (dry measurement)

Cups to Pints Conversion 

There are 2 cups in a pint.

Converting measurements between cups and pints is a common task. This is especially true when sourcing recipes online, as recipes are being generated from all corners of the world. 

Both cups and pints are used to measure liquid and dry ingredients.  Here are some calculation conversions to help determine how many cups in a pint. 

US Cups to US Pints Conversion:

  • 1 US cup is equal to 0.5 US pints.
  • To convert from cups to pints, divide the number of cups by 2

Example: If a recipe calls for 4 cups of milk, it equals 4 divided by 2, which equals 2 US pints of milk.

US Pints to US Cups Conversion:

  • 1 US pint is equal to 2 US cups.
  • To convert from pints to cups, multiply the number of pints by 2.

Example: If you have 3 US pints of water, it is equivalent to 3 multiplied by 2, which equals 6 US cups of water.

UK Cups to UK Pints Conversion:

  • 1 UK cup is equal to 0.125 UK pints.
  • To convert from cups to pints, divide the number of cups by 8.

Example: If a recipe calls for 10 UK cups of flour, it is equivalent to 10 divided by 8, which equals 1.25 UK pints of flour.

UK Pints to UK Cups Conversion:

  • 1 UK pint is equal to 8 UK cups.
  • To convert from pints to cups, multiply the number of pints by 8.

Example: If you have 5 UK pints of oil, it is equivalent to 5 multiplied by 8, which equals 40 UK cups of oil.

US Cups to UK Cups Conversion:

  • 1 US cup is approximately equal to 0.83 UK cups.
  • To convert from US cups to UK cups, multiply the number of US cups by 0.83.

Example: If you have 2 US cups of sugar, it is approximately equal to 2 multiplied by 0.83, which equals 1.66 UK cups of sugar.

UK Cups to US Cups Conversion:

  • 1 UK cup is approximately equal to 1.2 US cups.
  • To convert from UK cups to US cups, multiply the number of UK cups by 1.2.

Example: If a recipe calls for 3 UK cups of honey, it equals approximately 3 multiplied by 1.2, which equals 3.6 US cups of honey.

Check out Cups to Quarts Conversion as well!

Measuring cups of healthy food.

Measuring Cup Tips

The instant prize when measuring baking is to measure in weight with a scale. Cups are also fine to use. There are just a couple of steps to prevent an inaccurate result.

One key thing to consider is how to pack the cup properly. The ingredients being measured must not be too densely packed. The same principle applies to measuring with a tablespoon or teaspoon. Do not dip the cup directly into a packed container, sugar, or flour. First, loosen that ingredient up to get particles of air through it. A fork or a metal spoon can be used depending on how tightly packed it is.

For an accurate measurement, the best route to do this is to lift the element out and fill the cup. Give the cup a little shake, and then use the back of a knife with a straight edge to level off the excess.

The same applies when measuring sugar or cocoa powder, as these ingredients also tend to settle densely if left for a while.

Imperial vs. American Pints

Imperial pints and American pints are two different units of measurement for liquid volume. An Imperial pint is commonly used in the United Kingdom and equals 20 fluid ounces. An American pint in the United States equals 16 fluid ounces. 

As a result, an Imperial pint is larger than an American pint, with the former being approximately 4/5 of a U.S. pint. It is essential to be mindful of these distinctions when dealing with recipes or measurements across these two systems.

Conversion Chart

Pints (pt)Cups (c)
1 pt2 cups
2 pt4 cups
3 pt6 cups
4 pt8 cups
5 pt10 cups
6 pt12 cups
7 pt14 cups
8 pt16 cups

Each pint contains 2 cups, and you can multiply the number of pints by 2 to find the equivalent number of cups. For example, 3 pints would be 3 * 2 = 6 cups.

Frequently Asked Questions

How many cups makes 1 pint?


In the United States, there are 2 cups in 1 pint. This is the same for both dry and liquid pints. The metric system uses a different definition of a pint, which is equal to 0.5 liters. In the metric system, there are 0.42 liters in 1 pint.

Is 1 cup 8 oz or 16 oz?

1 cup is 8 ounces, not 16 ounces. 1 cup of liquid is equal to 8 fluid ounces in the United States. This is the standard measurement for liquid ingredients in recipes. 16 ounces is equal to 2 cups. However, there are some exceptions to this rule. For example, a cup of flour is equal to 4 ounces, and a cup of sugar is equal to 7 ounces. These measurements are used for dry ingredients, and they may vary depending on the type of ingredient.

How many ounces are in a dry cup?

There are 4.5 ounces in a dry cup. This is the standard measurement for dry ingredients in recipes. The weight of a dry ingredient can vary depending on the type of ingredient, but 4.5 ounces is a good estimate for most dry ingredients. For example, 1 cup of all-purpose flour weighs 4.5 ounces, 1 cup of sugar weighs 7 ounces, and 1 cup of brown sugar weighs 6 ounces. Check out How Many Ounces In a Cup for more information.

Is 2 cups equal to 1 pint?

Yes, 2 cups is equal to 1 pint. This is the standard measurement for both liquid and dry pints in the United States. In the metric system, a pint is equal to 0.5 liters, which is about 1.75 cups.

What are pints used to measure?

Pints are used to measure liquid and dry ingredients. In the United States, there are two types of pints: liquid pints and dry pints. Liquid pints are used to measure liquids, and dry pints are used to measure solids. The two types of pints are not equal in size, with a liquid pint being slightly larger than a dry pint.

How many cups in a pint of beer?

There are 2 cups in a pint of better.

How many ounces equal half a cup? 

4 fluid ounces equal half a cup.

How many cups in a pint of water?

There are 2 cups in a pint of water.

How many cups in a gallon?

There are 16 cups in a gallon in the United States. This is the standard measurement for both liquid and dry gallons in the United States. In the metric system, a gallon is equal to 3.785 liters, which is about 12.8 cups.

Did this article help you learn about how many cups in a pint? Read these articles for more helpful information about baking and cooking!

You May Also Enjoy

If you enjoyed this how many cups are in a pint post, please leave a rating and comment! For more inspiration, check out my FacebookInstagram, and Pinterest. For free weekly meal plans and more free resources, sign up to receive my free newsletter.

Posts may contain affiliate links. If you purchase a product through an affiliate link, your cost will be the same but 100 Days of Real Food will automatically receive a small commission. Your support is greatly appreciated and helps us spread our message!

About The Author

Leave a Comment

Your email address will not be published. Required fields are marked *